Are your dishes coming out dirty or smelling odd? A clogged dishwasher filter could be the problem. Over time, food particles, grease, and debris can build up, blocking water flow and leaving a mess inside the dishwasher tub.

When you skip cleaning the filter, it can lead to bad smells, a damaged filter, or poor drainage. Even regular pre-rinsing won't help if the lower filter, upper filter, or flat filter of the dishwasher filter is packed with gunk. The result? Fewer clean dishes, more frustration.

This guide from Industry Kitchens will walk you through step-by-step instructions on how to clean the dishwasher filter properly to help prevent clogs and odours. You'll only need simple tools like dish soap, white vinegar, a soft brush, or an old toothbrush. From soaking in hot water to scrubbing gently and learning how to twist the filter clockwise, we'll show you exactly what to do, right by your kitchen sink.

Want to go beyond just filter cleaning? Explore full-step cleaning tips in our Easy Guide: How to Clean a Commercial Dishwasher.



A worker loads dishes into a commercial dishwasher in a busy kitchen.



Why You Need to Clean Your Dishwasher Filter Regularly

Your dishwasher filter is responsible for keeping food particles, grime, and grease from entering the drain of your dishwasher, which could lead to drainage issues and the spread of bacteria and odors. If you don't clean it regularly, the filter gets clogged, and that impacts how well your dishwasher performs.

If you want to know why you need to clean a dishwasher filter, here are some issues that a dirty filter causes:

  • Bad smells and dirty water in the tub

  • Reduced spray arm effectiveness

  • Potential leaks

  • Shortened dishwasher lifespan

  • Poor cleaning results

Regular filter cleaning takes just a few minutes but makes a huge difference in keeping your machine running efficiently.

If you're unsure how your unit works or why maintenance matters, start by Understanding What a Commercial Dishwasher is.



Food waste and debris stuck on a dishwasher's mesh filter screen.



Signs It's Time for a Dishwasher Filter Clean

Watch for these warning signs that indicate your dishwasher filter regularly needs attention:

  • Dishes are still dirty after a full cycle

  • Water is pooling at the bottom of the tub

  • Bad smells are coming from the machine

  • Longer wash times or poor drainage

  • Visible food debris around the filter area

  • Louder noises than usual

  • White spots or soap residue on dishes

If you notice any of these, it's time to clean your dishwasher filter before it leads to bigger issues.

Spotting signs like poor drainage or residue? You may need more than a filter clean. Here's How to Deep Clean A Commercial Dishwasher: An Easy Guide.



What You'll Need Before You Start

Before you begin, it's best to get your tools ready. You don't need anything fancy to clean your dishwasher filter — just a few everyday items will do the job. These will help you gently scrub away grime without damaging the filter.

Here's what you'll need:

  • A soft brush, an old toothbrush, or a wire brush to clean the fine mesh and inside parts

  • A large bowl or kitchen sink filled with warm water to soak and rinse the parts

  • A few drops of dish soap for extra grease-fighting power

  • A soft cloth or towel to gently squeeze and dry everything

  • Optional: a scouring pad for any stuck-on gunk on the lower filter

Check your owner's manual to locate your specific filter type and removal instructions.

Here's a quick guide to help you identify the common types of dishwasher filters:

  • Lower filter – Captures large food debris and sits at the bottom of the tub.

  • Upper filter – Traps fine particles and prevents them from recirculating during a wash.

  • Flat or cylindrical mesh filter – Usually found at the base, and helps block smaller bits from entering the drain.

If you're also dealing with limescale or hard water build-up, see our How to Descale a Commercial Dishwasher: Simple Guide.



A person washes food debris off a dishwasher filter with water and a brush.



Step-by-Step Guide: Cleaning Your Dishwasher Filter

Step 1 – Turn Off the Dishwasher and Remove the Bottom Rack

Turn off the dishwasher and let it cool down completely. Pull out the lower dish rack to reach the filter area at the bottom of the dishwasher tub. This makes it easier to start cleaning.

Step 2 – Take Out the Filter

Find the dishwasher filter — usually a round or flat piece with a fine mesh. Follow any arrows indicating how to unlock it. Most models let you simply twist the filter to remove it from its locked position.

Step 3 – Soak the Filter in Hot Water

Take a large bowl or your kitchen sink and fill either with hot water and a little dish soap. Insert the filter and leave to soak for 10-15 mins. This loosens grease and food debris to help in easy cleaning.

Step 4 – Scrub Gently and Rinse Thoroughly

Use a soft brush, an old toothbrush, or a wire brush to scrub the filter, especially around the fine mesh, gently.

Caution: Avoid using steel wool or harsh chemical cleaners, as these can damage the filter or the dishwasher's interior. Rinse it under warm water until it's clean and clear.

Step 5 – Dry and Reinstall

Pat the filter dry with a soft cloth or towel. Line it back up in the dishwasher, making sure it fits properly. Then simply twist it back into place until it clicks into the locked position.



Gloved hands holding a clean dishwasher filter after maintenance.



How Often Should You Clean Your Dishwasher Filter?

Regular maintenance schedule:

  • Every 2–4 weeks, for regular use and light food particles

  • Once a week, if you run it daily or skip pre-rinsing

  • After heavy loads, like after family dinners or baking

  • Right away, if you notice bad smells, dirty water, or food stuck in the filter

Quick cleaning keeps your machine fresh and your dishes sparkling.

Proper filter care starts with knowing your machine. Learn the basics in our Easy Guide on How to Use Commercial Dishwashers.



Additional Dishwasher Cleaning Tips

Keep your entire dishwasher clean with these simple habits:

  • Wipe door seals weekly

  • Clean spray arms monthly if holes appear blocked

  • Run an empty hot cycle with vinegar monthly

  • Clear food debris after large loads

  • Avoid overloading racks

  • Use recommended detergent amounts

  • Follow your manual's care instructions



A repair technician fixes a dishwasher using tools from a blue toolbox.



Know When to Call for Experts

Contact a technician if you experience:

  • Persistent drainage issues after filter cleaning

  • Water is leaking from the machine

  • Unusual grinding or loud noises

  • Electrical problems

  • Filter is damage or craked

Don't attempt to disassemble the unit yourself - professional diagnosis ensures safe, proper repairs.



Conclusion

Cleaning your dishwasher filter may seem like a small task, but it makes a big difference. It helps your dishwasher run better, keeps your dirty dishes cleaner, and stops bad smells from building up. With regular care and more dishwasher cleaning tips, you can avoid bigger problems later on.

Make it part of your monthly routine. It only takes a few minutes to check the filter, give it a gentle clean, and keep everything flowing smoothly. For more expert tips and trusted products, visit Industry Kitchens.

A little maintenance now can save you time, money, and stress down the track, and you can find more dishwasher cleaning tips online.

Looking for a reliable machine with easier maintenance? Explore our Top Picks for Best Commercial Dishwasher Brand.



Frequently Asked Questions

What happens if I don't clean my dishwasher filter?

If you skip the regular dishwasher filter cleaning, food particles can build up. This can lead to a dirty filter, a clogged spray arm, and poor water flow to the dishwasher tub. Over time, the dishwasher pump may get damaged, and you'll end up with dirty dishes.

Can you clean a dishwasher filter with vinegar (and baking soda)?

Yes, you can clean a dishwasher filter using white vinegar and baking soda. Soak the filter in hot, soapy water with two cups of vinegar to loosen soap residue and food debris. Use a soft brush or an old toothbrush to scrub for a more thorough cleaning, gently.

How to clean a dishwasher drain trap?

First, remove the bottom rack and take out the coarse filter, flat filter, or cylindrical filter, depending on your dishwasher model. Check for foreign objects, food residue, or calcium deposits around the back corners and near the bottom spray arm. Rinse the area with warm water and wipe it with a soft cloth or scouring pad if needed.

Is there a filter in the dishwasher that needs to be changed?

Many dishwashers come with reusable filters like the lower filter and upper filter, which just need routine maintenance. However, older dishwashers or models with self-cleaning filters may include a new filter that needs replacing. Always check your owner's manual or product manual for your specific dishwasher model.

Can I run my dishwasher without the filter?

No, never run your dishwasher without the filter in place. A loose filter or a missing one can allow food particles, debris, and even foreign objects into the dishwasher pump. This can block the spray arm and leave you with more dirty dishes after loading dishes and running a cycle.



Read more of our related articles: