| Brand | DIHR |
|---|
Undercounter glass, dish & cutlery washer.
6 washing cycles 90/120/180/60/180/360sec.
2.5 - 7 litres per cycle.
Double skin door with saftey switch & non-return valve.
Stainless steel pressurised boiler with rinse pump.
Glass/dish height 340mm. Rack dimensions - 500 x 500mm.
2 washing/rinsing arms & drain pump.
Built in Rinse aid and detergent dispenser.
Complete with 1 x plate basket (500x500), 1 x large mesh basket and 1 x cutlery basket.
Power 3.6kW, single phase 240V/50Hz, 15Amps.
WARRANTY: 24 months parts / 24 months labour
Products generally carry a warranty period of 12 months.
Some manufacturers have options to increase this up to 5 years.
The following are all specifically excluded from warranty provision:
(i) Toaster elements, light/LED/Fluorescent tubes or globes, infra-red tubes, quartz tubes or any glass items or damage to cutting blades.
(ii) Installation, or damage due to improper installation, or connection to incorrect gas or voltage or poor-quality water or equipment damaged in transit or by accident, alteration, negligence, abuse, misuse or as a result of unauthorised repair or damage or deterioration of equipment caused by the use of unauthorised spare parts.
(iii) Damage to or deterioration of equipment operated or maintained contrary to operating and/or installation instructions.
(iv) Cleaning of equipment.
(v) Voltage or gas conversions or pilot light adjustments or thermostat calibrations.
(vi) Travel costs, overtime rates, or other like surcharges, freight/carriage to or from the manufacturer's warehouse or premises or authorised repairer in the event of warranty claim. Warranty work is carried out between the hours of 8.30am – 4.30pm weekdays only.
Buyer’s Responsibility
Before you request a repair to the equipment under this warranty please check the following to save you unnecessary expenses. Subject to any other rights you may have under the Australian Consumer Law, you will have to pay for faults or problems not covered by this warranty. OPERATION: Make sure your equipment is operated and maintained in accordance with the instructions in the supplied manuals. INSTALLATION: Make sure your product is correctly installed following the instructions in the supplied manuals. This includes the correct connection of services such as electricity, gas, water, drainage, and any required chemicals.
Warranty
Generally, all equipment supplied are warranted against defects in material and workmanship for a period of 12 months from the date of purchase.
This warranty is subject to the following conditions:
· The warranty period is not renewed or extended as a result of a warranty repair or replacement.
· The warranty is not transferable and is only offered to the original buyer.
· The warranty does not extend to any products that have been completely or partially disassembled or that have had unauthorised alterations and modifications made to the product, including missing parts.
· The warranty terms cannot be amended except in writing by an authorised representative of the manufacturer or importer.
· Any warranty claim must meet the requirements set out below in “How to Make a Warranty Claim”.
· Warranty work must be performed by the importer or manufacturer or by an authorised & approved service provider.
· Warranty for coffee machines & coffee equipment is 12 months parts only.
This warranty does not cover normal or scheduled maintenance of the product, nor does it cover the replacement of consumable items such as glass, ceramics, globes, seals, belts, water filters, and fuses or the resetting of the safety devices such as circuit breakers and clearing of drains.
Warranty exclusions
This warranty will not apply to a defect or fault to the extent to which it arises from:
· Improper installation or commissioning of the product.
· Operation, use or maintenance of the product otherwise than in accordance with the instructions provided. Including cleaning of machinery.
· Use of chemicals other than those recommended by the manufacturer.
· Accidental damage, misuse, negligence or any other failure to take reasonable care.
· Use of the product for a purpose or in environmental conditions outside those specified.
· Damage caused through blocked drains & pipes and the clearance of blockages.
· Damage caused by and clearance of blockages to pilots, injectors and burners.
· Damage arising from corrosion and/or limescale.
· Parts or items not supplied by the importer or manufacturer or the authorised service provider
· Damage caused by rodents or insects
How to make a warranty claim
If a product fails within the warranty period, immediately stop using the product and store in a safe, dry environment and contact the importer or manufacturer as soon as possible.
Before providing any warranty service, the importer or manufacturer may require the provision of proof of purchase or require responses to questions designed to assist with diagnosing potential faults. All requests must be responded to promptly at the buyer's expense.
The importer or manufacturer will require the buyer to provide the buyer's credit card details before providing any warranty service. The buyer may need to authorise the importer or manufacturer to charge the buyer's credit card for:
· the cost of repairs carried out by the importer or manufacturer (including labour costs and the costs of parts) which are not covered by this warranty (including where the exclusions listed above are applicable) or not required to be carried out pursuant to the Australian Consumer Law (if applicable); and
· the additional fees payable by the buyer under this warranty as set out in the section below titled" Costs of obtaining warranty service".
Where it is possible to do so, the importer or manufacturer will provide the buyer with an estimate of such costs prior to the costs being incurred by the importer or manufacturer. The buyer acknowledges that the estimates may be given by the importer or manufacturer in stages. For example, the importer or manufacturer may incur travel costs to attend a location before then assessing a product and giving the buyer an estimate of the costs to repair that product. The buyer must notify the importer or manufacturer immediately should further discussion or clarification be required prior to the costs being incurred by the importer or manufacturer.
Costs of obtaining warranty service
Additional fees will be payable for:
· Service outside the normal working hours or on public holidays.
· Service outside the importer or manufacturer’s service area.
· Additional costs of the warranty repair such as accommodation, cost of transport (flights/ferries), site inductions and freight.
· Poor access and waiting time
The current rates for any additional fees can be obtained from the importer or manufacturer.
Other rights
The following statement applies where the product is supplied to a ‘consumer’ under the Australian Consumer Law: The benefits given by the importer or manufacturer warranty are additional to other rights and remedies that you may have under law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits given by the warranty by the importer or manufacturer are additional to other rights and remedies that you may have under laws relating to our products.
The Australian Consumer Law allows suppliers to exclude the requirement to pay compensation for reasonably foreseeable loss or damage in certain circumstances.
The rental agreement commences on the day of installation and your first payment will be deducted 7 days after delivery. The Silver Chef rental agreement term is a 12-month contract, but you do have the option to purchase the products at any time and you will receive a 75% rental rebate, excluding GST. You also have the option to upgrade anytime in the same category or return the goods after 12 months if no longer required.
Please be advised that Industry Kitchens will require a 10% refundable holding deposit to secure your order. This 10% is fully refundable. You will receive this refund after the goods have been delivered. Please note that this 10% deposit is separate from any fees Silverchef require.
Last updated: March 2026 · Specifications sourced from official DIHR product literature
Italian-made commercial warewashing built for busy hospitality and foodservice venues. Fast cycles, consistent hygiene results, and efficient operation across every format — from compact undercounter glasswashers to high-capacity upright pot washers with heat recovery. Backed by a 24-month parts and labour warranty.
DIHR commercial dishwashers and glasswashers deliver reliable Italian performance with fast wash cycles, consistent hygiene results, and efficient operation — ideal for busy hospitality and foodservice venues. All DIHR equipment is made in Italy and backed by a 24-month parts and 24-month labour warranty — a full two-year warranty that exceeds the 12-month standard offered by most competing brands in the Australian market.
The DIHR range covers the full warewashing spectrum — from compact undercounter glasswashers and dishwashers through to hood-type passthrough machines and a comprehensive pot washer range with heat recovery options. Industry Kitchens is an authorised DIHR dealer with national warehouse coverage and SilverChef finance.
Every DIHR machine is designed and manufactured in Italy — delivering the engineering quality and reliability that Italian commercial warewashing is known for, at a competitive Australian price point.
Full 24-month parts and 24-month labour warranty across the range — twice the standard 12-month coverage offered by most competitors. Industry Kitchens can assist with all warranty claims nationally.
Selectable cycles from 60 seconds — keeping pace with high-turnover service periods. The GS 40T offers 60/90/120/180 second options so operators can match cycle time to soil load and throughput demand.
The GS 40T uses only 1.8 litres per cycle — highly efficient for an undercounter glasswasher. Built-in rinse aid and detergent dispensers are standard, with a non-return valve and drain pump included.
From the LP1 S4 undercounter entry through to the LP4 S8 TR Plus upright with heat recovery — DIHR covers every pot washing requirement from small café to large institutional kitchen.
DIHR's TR (Thermo Recovery) system on STR and S8 TR upright pot washer models captures exhaust heat to pre-heat incoming water — reducing energy consumption for high-cycle operations.
Undercounter glasswashers and dishwashers, passthrough hood dishwashers, and pot washers from undercounter to large-capacity upright.
DIHR's pot washer range covers every scale of operation — from the LP1 S4 undercounter entry unit through to the high-capacity LP4 S8 TR Plus upright with heat recovery. TR suffix models reduce energy costs through exhaust heat recapture.
UPRIGHT CHAMBER POT WASHERS — LP1 to LP4
The GS 40T is the most popular model in the DIHR undercounter range — confirmed specs from official literature.
| Specification | GS 40T |
|---|---|
| Type | Undercounter glasswasher |
| Origin | Made in Italy |
| Rack dimensions | 400×400mm |
| Glass/dish height | 305mm |
| Wash cycles | 4 selectable: 60 / 90 / 120 / 180 seconds |
| Water per cycle | 1.8 litres |
| Wash/rinse arms | 2 washing/rinsing arms |
| Door | Double-skin with safety switch |
| Drain pump | Built-in drain pump + non-return valve |
| Chemical dosing | Built-in rinse aid and detergent dispenser |
| Power | 3.45kW · 240V/50Hz · 15A single phase |
| Dimensions (W×D×H) | 450×535×700mm |
| Weight | 37kg |
| Included accessories | 2× glass basket (400×400mm) · 1× saucer holder · 1× cutlery basket |
| Warranty | 24 months parts / 24 months labour |
| Your situation | Recommended model | Key reason |
|---|---|---|
| Small bar — glassware only, undercounter | GS 40T | 400mm rack, 1.8L/cycle, 60s minimum, 15A single phase, 24-mth warranty |
| Café or restaurant — undercounter dishwasher | GS 50T | 500mm undercounter — crockery, glasses, cutlery |
| Need glass, dish AND cutlery from one 400mm machine | OPTIMA 400 | Combination glass/dish/cutlery washer in 400mm format |
| Need glass, dish AND cutlery from one 500mm machine | OPTIMA 500 | Combination glass/dish/cutlery washer in 500mm format |
| Medium restaurant — passthrough needed, energy efficiency priority | H 11 ECO T | Hood-type passthrough — ECO variant, lower water/energy per cycle |
| Medium/large restaurant — passthrough, full spec | H 11 T | Hood-type passthrough — full specification |
| Pots and pans — small operation, undercounter | LP1 S4 | Undercounter pot washer entry — compact footprint |
| Pots and pans — passthrough hood format | LP1 400 PLUS | Wide-body hood-type pot washer — GN containers, large trays |
| High-volume pots — hotel, restaurant, aged care | LP1–LP3 S/STR Plus | Upright chamber — choose size to match throughput. TR for energy saving. |
| Largest-scale pots — hospital, central production | LP4 S8 Plus or LP4 S8 TR Plus ★ | Maximum chamber LP4 — standard or TR heat recovery for lowest running cost |
DIHR is an Italian commercial warewashing brand — all DIHR equipment is made in Italy. The range delivers reliable Italian performance with fast wash cycles, consistent hygiene results, and efficient operation for busy hospitality and foodservice venues. Industry Kitchens is an authorised DIHR dealer with national coverage and SilverChef finance options.
DIHR products carry a 24-month parts and 24-month labour warranty — a full two-year warranty on both parts and labour. This is twice the 12-month standard offered by most competing brands in the Australian market. Industry Kitchens can assist with all warranty claims nationally — contact us with your model and serial number.
The DIHR GS 40T has a 400×400mm rack, 1.8 litres per cycle, four selectable wash cycles (60, 90, 120, 180 seconds), double-skin door with safety switch, built-in drain pump, non-return valve, and built-in rinse aid and detergent dispensers. Power: 3.45kW at 240V/15A single phase. Dimensions: 450×535×700mm. Weight: 37kg. Supplied with 2 glass baskets, 1 saucer holder, and 1 cutlery basket. Maximum glass/dish height: 305mm. 24-month parts and labour warranty.
The DIHR GS 40T runs on 240V/15A single phase at 3.45kW. This requires a dedicated 15-amp single-phase circuit — standard for undercounter warewashing in Australian commercial kitchens. A licensed electrician must install the dedicated circuit if one is not already present at the installation point.
Both are undercounter machines with a 400mm rack. The GS 40T is a dedicated glasswasher, while the OPTIMA 400 is a combination glass, dish, and cutlery washer — suited to venues that need one machine to handle all ware types in a 400mm format. Contact Industry Kitchens to compare specifications for your specific application and ware types.
Both are hood-type passthrough dishwashers in the DIHR H 11 series. The H 11 ECO T is the energy-efficient variant designed to reduce water and energy consumption per cycle. The H 11 T is the full-spec standard passthrough. Both require a mechanical ventilation canopy for installation. Contact Industry Kitchens for a full specification comparison to match your site's throughput requirements.
DIHR pot washers are specified when you need to wash large pots, gastronorm containers, mixing bowls, baking trays, and oversized items that don't fit in standard 400mm or 500mm rack machines. Start with the LP1 S4 (undercounter, small operations) or LP1 400 PLUS (wide-body hood-type). For higher volume, the LP1–LP4 upright chamber range scales up progressively — LP4 being the largest. Add TR (Thermo Recovery) on any upright model when the machine will run many cycles per shift and energy efficiency matters.
DIHR's TR (Thermo Recovery) system captures heat from exhaust steam and uses it to pre-heat incoming water — reducing energy consumption per cycle. Available on the LP1 S8 TR Plus, LP2 STR Plus, LP3 STR Plus, and LP4 S8 TR Plus upright pot washers. Recommended for high-throughput operations running many cycles per shift — the energy saving compounds significantly with high cycle counts.
LP1 through LP4 represent progressively larger chamber sizes in DIHR's upright pot washer range — LP1 is the entry and LP4 the largest capacity. Each is available in standard (S/S8) or heat recovery (STR/S8 TR) configurations. Chamber size determines the maximum item height and hourly throughput. Contact Industry Kitchens for a site-specific recommendation based on your operation's peak cycle demand.
Yes — SilverChef Rent-Try-Buy finance is available on DIHR dishwashers, glasswashers, and pot washers through Industry Kitchens. A 10% refundable holding deposit is required to secure the order. Contact Industry Kitchens for a finance quote on any DIHR model.
Tell us your venue type, covers per service, ware types, and phase supply — we'll confirm the right model and configuration.
Specifications sourced from official DIHR product literature and industrykitchens.com.au. GS 40T confirmed specifications: 400×400mm rack, 1.8L/cycle, 3.45kW/240V/15A, 450×535×700mm. Hood-type passthrough dishwashers require a mechanical ventilation canopy — confirm with your kitchen designer and local council before specifying. 24-month parts and labour warranty confirmed on GS 40T and consistent across the DIHR range. Last updated March 2026. Contact us to confirm current stock and pricing.