| Brand | Zip Water |
|---|---|
| Zip Water Type | Boiling |
Zip HydroTap Design Range Boiling, Ambient, Filtered water system features a single under bench command centre including full colour interactive touch screen display with pin code protection and customisable settings including boiling water safety mode, 2 energy saving modes including ON/OFF timers and 2 hour sleep mode, SteriTouch® antimicrobial protection impregnated into key water paths for enhanced hygiene, and 0.2 micron water filtration.
Capacity: Residential
Products generally carry a warranty period of 12 months.
Some manufacturers have options to increase this up to 5 years.
The following are all specifically excluded from warranty provision:
(i) Toaster elements, light/LED/Fluorescent tubes or globes, infra-red tubes, quartz tubes or any glass items or damage to cutting blades.
(ii) Installation, or damage due to improper installation, or connection to incorrect gas or voltage or poor-quality water or equipment damaged in transit or by accident, alteration, negligence, abuse, misuse or as a result of unauthorised repair or damage or deterioration of equipment caused by the use of unauthorised spare parts.
(iii) Damage to or deterioration of equipment operated or maintained contrary to operating and/or installation instructions.
(iv) Cleaning of equipment.
(v) Voltage or gas conversions or pilot light adjustments or thermostat calibrations.
(vi) Travel costs, overtime rates, or other like surcharges, freight/carriage to or from the manufacturer's warehouse or premises or authorised repairer in the event of warranty claim. Warranty work is carried out between the hours of 8.30am – 4.30pm weekdays only.
Buyer’s Responsibility
Before you request a repair to the equipment under this warranty please check the following to save you unnecessary expenses. Subject to any other rights you may have under the Australian Consumer Law, you will have to pay for faults or problems not covered by this warranty. OPERATION: Make sure your equipment is operated and maintained in accordance with the instructions in the supplied manuals. INSTALLATION: Make sure your product is correctly installed following the instructions in the supplied manuals. This includes the correct connection of services such as electricity, gas, water, drainage, and any required chemicals.
Warranty
Generally, all equipment supplied are warranted against defects in material and workmanship for a period of 12 months from the date of purchase.
This warranty is subject to the following conditions:
· The warranty period is not renewed or extended as a result of a warranty repair or replacement.
· The warranty is not transferable and is only offered to the original buyer.
· The warranty does not extend to any products that have been completely or partially disassembled or that have had unauthorised alterations and modifications made to the product, including missing parts.
· The warranty terms cannot be amended except in writing by an authorised representative of the manufacturer or importer.
· Any warranty claim must meet the requirements set out below in “How to Make a Warranty Claim”.
· Warranty work must be performed by the importer or manufacturer or by an authorised & approved service provider.
· Warranty for coffee machines & coffee equipment is 12 months parts only.
This warranty does not cover normal or scheduled maintenance of the product, nor does it cover the replacement of consumable items such as glass, ceramics, globes, seals, belts, water filters, and fuses or the resetting of the safety devices such as circuit breakers and clearing of drains.
Warranty exclusions
This warranty will not apply to a defect or fault to the extent to which it arises from:
· Improper installation or commissioning of the product.
· Operation, use or maintenance of the product otherwise than in accordance with the instructions provided. Including cleaning of machinery.
· Use of chemicals other than those recommended by the manufacturer.
· Accidental damage, misuse, negligence or any other failure to take reasonable care.
· Use of the product for a purpose or in environmental conditions outside those specified.
· Damage caused through blocked drains & pipes and the clearance of blockages.
· Damage caused by and clearance of blockages to pilots, injectors and burners.
· Damage arising from corrosion and/or limescale.
· Parts or items not supplied by the importer or manufacturer or the authorised service provider
· Damage caused by rodents or insects
How to make a warranty claim
If a product fails within the warranty period, immediately stop using the product and store in a safe, dry environment and contact the importer or manufacturer as soon as possible.
Before providing any warranty service, the importer or manufacturer may require the provision of proof of purchase or require responses to questions designed to assist with diagnosing potential faults. All requests must be responded to promptly at the buyer's expense.
The importer or manufacturer will require the buyer to provide the buyer's credit card details before providing any warranty service. The buyer may need to authorise the importer or manufacturer to charge the buyer's credit card for:
· the cost of repairs carried out by the importer or manufacturer (including labour costs and the costs of parts) which are not covered by this warranty (including where the exclusions listed above are applicable) or not required to be carried out pursuant to the Australian Consumer Law (if applicable); and
· the additional fees payable by the buyer under this warranty as set out in the section below titled" Costs of obtaining warranty service".
Where it is possible to do so, the importer or manufacturer will provide the buyer with an estimate of such costs prior to the costs being incurred by the importer or manufacturer. The buyer acknowledges that the estimates may be given by the importer or manufacturer in stages. For example, the importer or manufacturer may incur travel costs to attend a location before then assessing a product and giving the buyer an estimate of the costs to repair that product. The buyer must notify the importer or manufacturer immediately should further discussion or clarification be required prior to the costs being incurred by the importer or manufacturer.
Costs of obtaining warranty service
Additional fees will be payable for:
· Service outside the normal working hours or on public holidays.
· Service outside the importer or manufacturer’s service area.
· Additional costs of the warranty repair such as accommodation, cost of transport (flights/ferries), site inductions and freight.
· Poor access and waiting time
The current rates for any additional fees can be obtained from the importer or manufacturer.
Other rights
The following statement applies where the product is supplied to a ‘consumer’ under the Australian Consumer Law: The benefits given by the importer or manufacturer warranty are additional to other rights and remedies that you may have under law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits given by the warranty by the importer or manufacturer are additional to other rights and remedies that you may have under laws relating to our products.
The Australian Consumer Law allows suppliers to exclude the requirement to pay compensation for reasonably foreseeable loss or damage in certain circumstances.
The rental agreement commences on the day of installation and your first payment will be deducted 7 days after delivery. The Silver Chef rental agreement term is a 12-month contract, but you do have the option to purchase the products at any time and you will receive a 75% rental rebate, excluding GST. You also have the option to upgrade anytime in the same category or return the goods after 12 months if no longer required.
Please be advised that Industry Kitchens will require a 10% refundable holding deposit to secure your order. This 10% is fully refundable. You will receive this refund after the goods have been delivered. Please note that this 10% deposit is separate from any fees Silverchef require.
Zip Water › Residential · 16 products · Last updated March 2026
Instant boiling, chilled, and sparkling filtered water at the touch of a button — no kettle, no plastic bottles, no waiting. 16 residential Zip Water products including HydroTap G5 boiling-chilled, boiling-ambient, and chilled-sparkling models, the Celsius All-in-One Arc, the ChillTap range, replacement filters, and filter taps.
Choose the right combination for your home: boiling only, boiling + chilled, chilled + sparkling, or all-in-one.
Instant 98°C boiling and 3–5°C chilled filtered water on demand. Replaces both the kettle and the filtered water jug. Recommended for most family kitchens where both hot drinks and cold drinking water are daily needs.
Instant 98°C boiling and filtered ambient (room temperature) water — no under-bench chiller. Lower purchase price and running costs. Ideal if your priority is eliminating the kettle and getting pure filtered water, and you're happy to keep cold drinking water in the fridge.
Arc-style tap head. Smooth arched profile — contemporary look for modern kitchens.
View Arc Plus →Cube-style tap head. Angular squared profile — bold architectural statement.
View Cube Plus →Elite Plus tap head. Premium residential specification with refined detailing.
View Elite Plus →Three temperatures from one Celsius Arc spout: boiling (98°C), hot (60–75°C), and ambient filtered. All-in-one single spout.
View Boiling Hot Ambient →Chilled (3–5°C) and sparkling filtered water without a boiling function. Perfect for entertaining kitchens and open-plan living areas where sparkling water on tap elevates the experience. CO2 cylinder required — connects to Command Centre during installation.
Classic Plus tap head. Chilled and sparkling, no boiling. Requires CO2 cylinder.
View Classic Plus →Arc-style tap head. Chilled and sparkling, no boiling. Requires CO2 cylinder.
View Arc Plus →Cube-style tap head. Chilled and sparkling, no boiling. Requires CO2 cylinder.
View Cube Plus →Under-bench chilled filtered water without any boiling function. Simpler and lower-cost than a full HydroTap. Suited to homes where a separate kettle or boiling tap is already in place, or apartments and secondary kitchens where only chilled filtered water is needed.
Chilled filtered water only. Entry-level price point. Under-bench unit. MicroPurity filtration included.
View CT1001 →Chilled and ambient filtered water. Two temperatures — cold and room temperature.
View CT1002 →Chilled and sparkling filtered water. No boiling. Requires CO2 cylinder. Great for dining and entertaining.
View CT1003 →Replacement MicroPurity filter for all Zip HydroTap models. 8-in-1 filtration. Replace annually or when unit indicates.
Buy Replacement Filter →Dedicated filtered cold water tap for residential kitchens. No chilling or boiling — pure filtered water at ambient temperature.
View Filter Tap Residential →Commercial-grade filtered water tap. Higher flow specification. Also suited to home kitchens with high daily usage.
View Filter Tap Commercial →Four questions to narrow it down before you buy.
Yes → choose Boiling + Chilled or ChillTap. The chiller in these models cools water to 3–5°C on demand — no waiting, no jug in the fridge. No (happy with cold water from the fridge) → choose Boiling + Ambient. Lower price, lower running costs, same instant boiling.
Yes → choose Chilled Sparkling (CS models) or ChillTap CT1003. These include a CO2 carbonation system. A CO2 cylinder installs in the Command Centre and needs refilling periodically. If boiling is also required, combine with a separate boiling tap — or consider the full HydroTap BCS commercial range for all five functions in one. No → any non-sparkling model is simpler and lower ongoing cost.
One hole → Celsius All-in-One. All functions delivered through a single Arc spout with no separate mixer tap required. One hole is all it needs — ideal for renovations with limited bench penetrations, or for the cleanest possible aesthetic. Two holes → any HydroTap paired with a separate mixer tap (Classic Mixer, Arc Mixer, or Cube Mixer). The HydroTap goes in one hole; the mixer in the other.
Classic — traditional curved spout; the most universal style for both contemporary and transitional kitchens. Arc — smooth arched profile; Scandinavian-influenced, suits handleless and minimalist kitchens. Cube — angular square profile; architectural and bold, suits industrial and statement-design kitchens. Celsius — all-in-one integrated single spout, any style. Match the tap to your mixer style where possible for a cohesive look.
A Zip HydroTap replaces three things at once: the kettle, the water filter pitcher, and the plastic water bottles. Beyond the convenience of instant boiling water, it delivers consistently pure filtered water at a temperature you actually want to drink — 3–5°C from the tap, every time.
98°C boiling water on demand in under two seconds — for tea, coffee, cooking, and blanching. No fill, no wait, no wasted boil.
MicroPurity 0.2-micron filtration removes microplastics, PFAS, lead, asbestos, chlorine, bacteria, and cysts. Not just better tasting — measurably cleaner.
Replace bottled water and filter pitchers entirely. The HydroTap's R290 refrigerant has 95% lower GWP than previous refrigerants, and 100% water-efficient air-cooled chilling wastes nothing.
Available in Arc, Classic, and Cube styles across chrome, brushed nickel, matte black, rose gold, brushed gold, and more. A design statement as much as an appliance.
The Boiling Chilled (BC) models include an under-bench chiller that cools filtered water to 3–5°C on demand — instant cold filtered water at the tap, no fridge required. The Boiling Ambient (BA) models deliver only boiling (98°C) and filtered room-temperature water — no chiller, no cold water on tap. Boiling Ambient models cost significantly less to purchase and have lower running costs as there is no compressor. If your priority is eliminating the kettle and you're happy to keep cold drinking water in the fridge or jug, the Boiling Ambient is the right choice. If you want instant cold filtered water at the tap, choose Boiling Chilled.
The Celsius All-in-One Arc (BCHA) delivers boiling, chilled, and ambient filtered water through a single integrated Arc spout — there is no separate mixer tap. The entire installation requires just one tap hole in the benchtop, making it the cleanest possible aesthetic for design-led kitchens and the simplest option for renovations where adding a second tap hole is not practical. Available in chrome and brushed nickel finishes.
The ChillTap is an under-bench chilled (and optionally sparkling) filtered water system without any boiling function — lower cost and simpler than a full HydroTap. Choose a ChillTap (CT1001–CT1003) if: you already have a kettle or separate boiling tap and just want pure cold filtered water; you live in an apartment with limited under-bench space; or chilled filtered water is the only priority. The CT1003 adds sparkling water alongside chilled (requires CO2 cylinder) — useful for a dedicated drinks station or dining area without a boiling point nearby.
Yes — Zip HydroTap requires a licensed plumber for installation, as it connects directly to the home's cold water supply. Zip also offers certified HydroTap installation through their service network, which includes benchtop cutting if required. For sparkling models, a CO2 cylinder must be installed and connected at the same time. The Command Centre sits in the under-sink cabinet — you'll need approximately 600mm of clear under-bench depth and a standard power outlet. Contact Industry Kitchens or Zip Water directly for installation referrals in your area.
The MicroPurity filter (Part No. 93701) typically needs replacing annually under normal household use. The Command Centre will alert you when replacement is due. Replacement filters are available through Industry Kitchens — see the product page for current pricing. Replacing the filter on schedule maintains the full 8-in-1 filtration performance — microplastics, PFAS, lead, asbestos, sediment, chlorine, bacteria, and cysts. Filter replacement is straightforward and does not require a plumber.
The residential range covers Classic Plus, Arc Plus, Cube Plus, Elite Plus, and Celsius Arc tap head styles. Finishes available in the residential range include chrome and brushed nickel (confirmed on Celsius All-in-One). Additional premium finishes — rose gold, brushed gold, matte black, gunmetal — may be available across specific models. Contact Industry Kitchens to confirm finish availability for the specific model you're considering before ordering.
Browse the full residential range or contact Industry Kitchens for help choosing the right Zip tap for your home.
Zip Water residential products available at Industry Kitchens. Prices shown are approximate sale prices ex GST — see individual product pages for current pricing. Boiling water is factory set to 98°C. Always use appropriate caution when dispensing boiling water — keep children away from the tap during boiling water dispensing. Zip HydroTap requires professional installation by a licensed plumber. Sparkling models require CO2 cylinder (not included) — installed at time of commissioning. Filter replacement (Part 93701) recommended annually. Last updated March 2026. Contact Industry Kitchens for product advice.